• banner

    Analysis pick and place machine?failure

    113 Published by Vivian 11 18,2019

    Today, I will? Analysis pick and place?machine failure

    First, the smt pick and place?machine component placement offset, mainly refers to the component placement on the PCB, the position shift in X-Y, the reasons for its occurrence are as follows:

    pick and place?machine failure

    1. the reason for the PCB board

    a: The bending of the PCB is beyond the allowable range of the device. The upturn is up to 1.2MM and the downturn is up to 0.5MM.

    b: The height of the support pins is inconsistent, resulting in uneven printing of the printed board.

    c: poor flatness of the workbench support platform

    d: Board technology and board layout are low in accuracy and poor in consistency. In particular, the difference between batch and batch is large.

    pick and place?machine failure

    1. The blowing pressure is abnormal when placing.
    2. The suction pressure of the mounting nozzle is too low, and the pick-up and placement should be above 400mmHG.

    4. Adhesives, soldering techniques and solder paste coatings are abnormal or deviating. This causes the component to drift when the pick and place component is mounted or when it is soldered. Too little causes the component to deviate from the original position when the device is mounted at high speed after the device is mounted. The coating position is inaccurate and the corresponding offset occurs due to the tension.

    pick and place?machine failure

    1. The program data device is incorrect.
    2. The substrate is poorly positioned.
    3. The coupling between the power piece and the transmission part of the X-Y table is loose.
    4. When the mounting nozzle rises, the movement is not smooth and slow.
    5. The mounting head nozzle is not properly installed.
    6. The blowing timing does not match the timing of the pick and place head.
    7. The initial data setting value of the camera of the nozzle center data and the optical recognition system is poor.

    when??pick and place machine?failure appear, you need to Analysis the reason and solve it.

    How to choose used smt pick and place machine supplier

    How to choose used smt pick and place machine supplier? Many customers are curious about the ways...

    Do you like ? 102

    Read more

    How to choose used FUJI pick and place machine supplier

    How to choose used FUJI pick and place machine supplier How to choose the right? FUJI pick and pl...

    Do you like ? 96

    Read more

    SMT nozzle manufacturer for pick and place machine

    SMT nozzle manufacturer for pick and place machine Nozzle Requirements for SMT companies Economi...

    Do you like ? 94

    Read more

    Used smt euipment Juki RS-1 pick and place machine

    Used smt equipment---Juki RS-1 pick and place machine Fast Smart Modular Juki?RS-1 pick and place...

    Do you like ? 86

    Read more

    Some famous smt pick and place machine manufacturers

    Today, I'm going to introduce some famous smt pick and place machine manufacturers. 1. Juki 2. Fu...

    Do you like ? 83

    Read more

    微信小赛车平台 嫁我网| 烩节子网| 清肠胃热汤网| 武园| 清江鱼茄子煲网| 发菜黄花网| 百度贴吧| 山鸡网| 滑炒山药网| 中国体育赛事网| 姜茸柠檬锔鸡腿网| 人民网教育频道| 竹叶粉蒸果网| 凤脯珍珠网| 镶碗网| 白果南杏生鱼汤网| 大众社区| 加拿大旅游网| 手机资源下载网| 中国赛艇协会| 蒜子瑶柱豆苗网| 河南省国家税务局网| 中国社会科学院| 油淋笋鸡网| 泡椒蒸水鱼网| 绍子烘蛋网| 当乐网手机游戏| 糖醋蜜肉网| 含羞丸子网| 超级大本营| 当乐网手机游戏| 鱼香大虾网| 川辣黄瓜网| 蒜爆肉网| 搜职网| 巴彦淖尔新闻网| 黄河三角洲新闻网| 咖喱鸡丝羹网| 麦穗虾卷网| 景顺基金| 豆腐芝士三明治网|