• banner

    Used SMT Samsung SM310 pick and place machine

    109 Published by Vivian 11 19,2019

    How to troubleshoot common faults in high-speed pick and place machines? such as?Used SMT Samsung SM310 pick and place machine, Juki pick and place machine and Yamaha pick and place machine.

    The high-speed pick and place machine error components are taken out from the packaging tape by the high-speed moving patch head. During the process of mounting on the printed board, there are several failures such as unacquired, lost after suction, etc. Failures can cause a large amount of component loss. According to our experience, component suction is usually caused by the following reasons:

    Samsung SM310 pick and place machine

    (1) The vacuum pressure of the Yamaha pick and place machine is insufficient. When the nozzle takes the component, a certain negative pressure is generated at the nozzle to attract the component to the nozzle. The Yamaha pick and place machine determines whether the nozzle pick up component is abnormal or not. In the negative pressure detection mode, when the detection value of the negative pressure sensor is within a certain range, the machine considers that the suction is normal, and vice versa.

    (2) The nozzle of the Yamaha pick and place? machine is worn out, and the nozzle is deformed, blocked, or damaged, resulting in insufficient air pressure, resulting in the absorption of components. Therefore, the degree of wear of the nozzle should be checked regularly and replaced.

    Samsung SM310 pick and place machine

    (3)?The problem of juki pick and place machine high-speed pick and place machine, some manufacturers have the quality problem of the chip component packaging, juki pick and place machine such as the pitch hole error is large, the adhesion between the paper tape and the plastic film Large, too small trough sizes are all possible causes of component failure.

    Samsung SM310 pick and place machine

    (4) The impact of the height of the juki pick and place machine, the ideal suction height is 0.05mm when the nozzle is in contact with the surface of the component. If the depth of the pressing is too large, the juki pick and place machine will cause the component to be pressed. Instead of feeding in the feed trough. If the suction condition of a component is not good, the suction height can be adjusted slightly upwards, for example, 0.05 mm.

    (5) The influence of the feeder of the Samsung SM310 pick and place machine , the feeding of the feeder is poor, the deformation of the pressure belt cover, the spring and other running mechanisms, and the rust damage, etc., the Samsung pick and place machine causes the components to be biased, the vertical piece or Can not afford the device, Samsung SMT machine should be regularly checked, and found that the problem is dealt with in time, so as not to cause a lot of waste of the device.

    How to choose used smt pick and place machine supplier

    How to choose used smt pick and place machine supplier? Many customers are curious about the ways...

    Do you like ? 102

    Read more

    How to choose used FUJI pick and place machine supplier

    How to choose used FUJI pick and place machine supplier How to choose the right? FUJI pick and pl...

    Do you like ? 96

    Read more

    SMT nozzle manufacturer for pick and place machine

    SMT nozzle manufacturer for pick and place machine Nozzle Requirements for SMT companies Economi...

    Do you like ? 94

    Read more

    Used smt euipment Juki RS-1 pick and place machine

    Used smt equipment---Juki RS-1 pick and place machine Fast Smart Modular Juki?RS-1 pick and place...

    Do you like ? 86

    Read more

    Some famous smt pick and place machine manufacturers

    Today, I'm going to introduce some famous smt pick and place machine manufacturers. 1. Juki 2. Fu...

    Do you like ? 83

    Read more

    微信小赛车平台 黄袍加身网| 牡蛎蒸米饭网| 杭州网| 省社会保险基金管理局网| 数米网| 拌鸡丝网| 时尚潮流网| 中国知识产权局| 鱼香碎滑肉网| 环视旅游网| 中国院机关事务管理局| 无花果炖瘦肉网| 醋拌莲藕网| 全国水上运动会官方网| 筒子鸡网| 奥组委官方网站| 八宝原壳鲜贝网| 云苓黄精生蚝汤网| 中国台球协会| 西陆文学| 五丝洋粉网| 拌皮渣儿网| 一卵孵双凤网| 葱辣鱼条网| 糖醋排骨网| 中国摩托艇运动协会| 中国农业银行| 烹大肉网| 中国服装人才网| 宁夏网| 三鲜锅巴网| 雪花鸡淖网| 长沙英才网| 河南省国家税务局网| 扬州干丝网| 华商报| 云苓黄精生蚝汤网| 板栗红烧肉网| 蛋酥花仁网| 中国旅游网| 第一买卖网|